Ministry of Electronics and Information Technology
(MeitY)

A.) The following FPGA boards and their associated design software tools are available:

FPGA Boards:

• Pynq Z2
• Pmod KYPD: 16-button Keypad
• Pmod OLEDrgb: 96 x 64 RGB OLED Display
• Pmod DA2: Two 12-bit D/A Outputs
• Pmod TPH2: 12-pin Test Point Header
• Boolean Board
• Urbana Board
• Arty A7-100T
• Kria KR-260
• Kria KV (Video)
• Pynq ZU
• Zynq UltraScale+ MPSoC ZCU104

Associated Design Software Tools:

• UEF-VIVADO-ENTER-25 (2 bundles)
• UEF-MATSIM-ADDON-25 (2 bundles)

For more details and datasheet, refer to the below link:

• https://c2s.gov.in/FPGA.jsp

A.) The following FPGA boards are centrally hosted at the ChipIN Centre:

• Versal VCK5000
• Alveo U55C

Associated Design Software Tools:

• UEF-VIVADO-ENTER-25 (2 bundles)
• UEF-MATSIM-ADDON-25 (2 bundles)

For more details and datasheet, refer to the below link:

• https://c2s.gov.in/FPGA.jsp

A.) Refer the following link (https://c2s.gov.in/FPGA.jsp) and raise a ticket at the ChipIN support portal (https://chipin.cdacb.in/) under the help topic 'Centralized Access to AMD/Xilinx Advanced FPGA Boards'

A.) To access the Alveo U55C or Versal VCK5000 development boards, follow the steps below:

Prerequisite:

• Install an SSH client such as MobaXterm before proceeding.

Username: xyz (Say)

Steps to Access the Boards:

Access Alveo U55C

Run the following command in the terminal:

ssh -x -p 53422 xyz@14.139.1.126

Access Versal VCK5000

Run the following command in the terminal:

ssh -x -p 51422 xyz@14.139.1.126

Sourcing and Opening Vivado:

Once logged in, execute the following commands to set up Vivado:

source /home/cdac/Xilinx/Vivado/2023.2/settings64.sh
export LM_LICENSE_FILE=2100@14.139.1.126
export XILINXD_LICENSE_FILE=2100@14.139.1.126
vivado &